How-To Videos

RK Gauge Wheel Arm Repair Kit Installation for JD 1700 Series

This is how to install the Gauge Wheel Arm Repair Kit from Copperhead Ag's RK Product Lineup. No matter how worn your gauge wheel arms are, this product should be able to take the side to side slop out of your arm.

The part number shown in the video is PR1150 and is for a John Deere 1700 series planter with original fully threaded arms, other kits available for other planters.

Click the link below to learn more

https://www.tonnerprecision.co...

RK Closing Wheel Arm Repair Kit for JD 1700 Worn

• This kit replaces the bushing on a closing wheel arm with a bearing. It can be used on brand new planters and on planters that already have some wear to the closing wheel arm. Having the closing wheel arms tight is critical to keeping closing wheels centered on the seed trench and ensuring that your closing wheel can operate at peak performance. If your arm is worn, you will need to weld a bearing housing on to the outside of the tailpiece to hold a ball bearing. If the closing wheel arm is new, this is not necessary and saves a lot of cost and work.

To learn more click on the link below

https://www.tonnerprecision.co...

Valion Seed Tube Gaurd Install - ME, ME2, ME Plus

Tom from Exapta installs 'bolt-on' / rivet-on Valion seed-tube guard on JD Max-Emerge Plus planter opener (also fits JD 7000, 7200, and Kinze 2000-series)

Distributing The Weight On Your Planter

Distributing the weight across your entire planter can help avoid compaction, reach consistent germination, and provide even seeding depth. Watch as Jason shares a few install tips and explains how a Martin-Till Weight Transfer Kit achieves proper weight distribution.

Yetter Twister Closing Wheel Install Guide

Installing Yetter Twisters? Check out this quick video for a quick install guide! Plus, access the full manual here.